500kg Load Mobile Scissor Lift with Outriggers

500kg Load Platform Height 6m Mobile Scissor Lift with Outriggers

MK600 Mini Scissor Lift is an aerial machine with good Lifting stability and widely used. Our factory develop and design it basing on absorbing domestic and abroad product advantages.
They are mainly applicable to office operations. Due to the whole machine has a small volume,it has better flexibility and maneuverability.Meanwhile,the machine has a wide use range and high mobility.

Main Technical Parameters

Work Principle

The hydraulic pump is driven by the motor, the high pressure oil goes into P cavity and put out to A cavity through check valve 1 and finally goes into hydraulic lifting cylinder,which gets the working platform rising up slowly.

For different loading, the relief valve2 can adjust the working pressure accordingly, which will avoid over loading or out of pressure.

When the working platform is descending, the solenoid valve 4 will be open with electricity, the hydraulic oil inside the cylinder will flow to A cavity and goes into the valve due to the gravity of the loading, and since the check valve 1 is reverse closed, the hydraulic oil can only pass to the open solenoid valve 4 and transit through the adjustable throttle valve to the oil tank by O cavity.

On basic above, the working platform will getting descending slowly and since the inside structure of the vale is pressure balance, the stability will not be effected by the loading fluctuation due to the the action of opening and closing is controlled by the electromagnet.

Safety Precautions​

1.The operation voltage on the platform is 24V
2.Emergency stop button on the paltform and ground
3.Auxiliary platform lowering
4.Hose burst valve safety
5.Rain-proof design electirc cabinet
6.Fodable fence on the platform
7. Outrigger on the chassis for more stability

scissor lift mobile

mobile aerial work platform

500kg Load Mobile Scissor Lift with Outriggers Images